クランプオン超音波流量計
カテゴリ:
キーワード:
Haichuan
1. 機器の紹介:
超音波流量計は、マイクロプロセッサー技術を基にした独立型の流量測定機器です。その動作原理は、超音波ビームが液体中を伝播する際、液体の流れによって伝播時間がわずかに変化し、この伝播時間の変化が液体の流速に比例することにあります。流量がゼロの場合は、2つのセンサーが音波を発信して受信するのに必要な時間が完全に同じになります(実際にゼロ流量を測定できる唯一の技術です)。一方、液体が流れている場合、上流方向への音波伝播時間は下流方向よりも長くなります。
2. 応用方向:
水道水、下水、海水などの流量測定に広く使用され、さまざまな配管サイズに対応可能です。
3. 機器の利点と特長:
♦ 0.5%の直線性、0.2%の再現性;
♦ プロファイルは、T6非導電性/特殊媒体を用いて測定されます。
♦ 低電圧マルチパルス平衡伝送および受信;
♦ ポジティブ/ネガティブ/ネット集計器;
♦ 絶縁型RS-485インターフェース、MODBUS RTU対応;
♦ 雑音防止設計、電気的に絶縁されたDC電源;
♦ 内蔵型熱測定器/カロリメーター;
♦ バッチ/定量コントローラー内蔵;
♦ 2チャンネル2線式PT1000プラチナ抵抗入力回路;
♦ ダイカストアルミケース(固定タイプ);
♦ アナログ4~20mA出力1系統;
♦ オプションのDC/AC/220V AC電源;
♦ サンプリング周波数を周期あたり128回に増やす;
♦ 内部64ビット浮動小数点データ処理;
♦ OCT周波数信号出力;
♦ 22ピコ秒の時間差測定分解能。
Technical parameters
|
parameter |
Instructions |
|
Precision |
1.0% |
|
Repeatability |
0.2% |
|
Flow rate range |
0.03~±7m/so |
|
Measurement principle |
Ultrasonic transmission time difference principle, 32-bit CPU operation, 8-byte double floating-point operation, dual CPU parallelism. |
|
Measuring Period |
50mS. (20 times per second, 64 sets of data per cycle). |
|
input |
Can input 5 current signals, accuracy 0.1% (such as: temperature, pressure, liquid level and other signals) |
|
output |
OCT Pulse output: 0-9999Hz; Analog output: 4~20mA, maximum load resistance 750Ω |
|
Pulse signal |
Positive, negative, net flow and heat accumulation pulse, relay and OCT output |
|
Communication interface |
Full-function RS232 serial interface, optional RS485 or CAN bus mode. |
|
Straight pipe section length |
Upstream ≥ 10D, downstream ≥ 5D, ≥ 30D from the pump discharge. |
|
Types of fluid |
Water, oil and other single-medium liquids |
|
Fluid turbidity |
≤10000ppm, and the bubble content is small. |
|
Fluid temperature |
-10~150℃. |
|
Fluid flow |
Flows in both directions can be metered separately, and the net flow can also be metered. |
|
Working temperature |
Host: -10-70℃ (contact the manufacturer for temperatures outside this range); Probe: -30℃~+150℃ |
|
Working humidity |
Host: 85%RH probe: waterproof working, water depth ≤ 3 meters. |
|
Power supply |
Standard version: DC24V, AC220V power supplystyle. Low power consumption version: 3.6v lithium battery / 9~36V. |
|
Sensor |
External clamping type: Small standard S1 type, suitable for pipe diameter DN15 ~ DN100mm; medium standard M1 type, suitable for pipe diameter DN50 ~ DN700mm. |
|
Large standard L1 type, suitable for pipe diameter DN300 ~ DN6000mm. Standard pipe section type: suitable for pipe diameter DN10 ~ DN400, the whole machine measurement accuracy ±0.5%. |
clamp-on ultrasonic flowmeter PRODUCT SPECIFICATION
関連製品
ご相談のメッセージを残してください、ようこそ
ご相談のメッセージを残してください、ようこそ
問い合わせ